6 tips to help prevent winter water damage to your business
Take action now to help stave off cold weather disasters to your store, shop, office, home office, warehouse, storage space or manufacturing facility.
1. Check for pipes exposed to cold air
Before the first freeze hits, walk through your building and look for visible water lines in areas that get little or no heat. This can include spaces like unheated storage areas, loading docks and poorly insulated walls.
For example, you might spot a bare pipe along an outside wall behind a stockroom sink. Or a water line passing through a drafty loading bay. Look for gaps around the pipes where cold air can enter. Keep a list of spots that may need insulation and which openings may need sealing.
2. Insulate exposed pipes
Once you’ve found exposed water pipes, check if they’re insulated. For bare sections, ask your plumber about fitted foam pipe sleeves. These wrap around the pipe and slow heat loss, giving the water inside more time before it freezes.
For indoor pipes, keep the heat running during cold weather, even if your business is closed for the weekend. Insulation can reduce the risk of frozen pipes, but a pipe can still freeze if the surrounding area stays cold long enough. The Louisiana Division of Administration recommends maintaining the building heat at 55 degrees even when it’s empty.
3. Seal cracks and gaps
Seal the building’s exterior to prevent cold air from cooling the building, especially in spots where water lines enter. If the opening around a pipe is wider than the pipe itself, cold air can blow through the gap.
For small gaps around pipes, ask your maintenance team to seal the opening with an appropriate caulk. For cold air coming in under a door, replace the door sweep for a tighter fit.
4. Identify where melting snow will drain
Before the first snowfall, have your gutters and downspouts professionally cleaned of leaves and debris. A clog can cause melting snow to spill over the edge of the gutter and pool near your foundation.
Check where your downspouts release water. Again, you don’t want water to pool near the foundation. Ask your maintenance team to extend them so water drains away from the building.
And if you use a snow removal service, agree on a spot to pile snow before the first storm. Keep piles clear of storm drains and downhill from entrances and loading bays.
5. Winterize outdoor faucets and irrigation lines
Before the first freeze hits, disconnect garden hoses and drain them for winter storage. If an outdoor faucet has its own indoor shutoff valve, close the valve, then open the outdoor faucet so water can drain from the line. Any water left in the pipe can freeze and cause it to burst.
If your business has a lawn irrigation system, schedule an appointment to drain and winterize it. If you lease your commercial space, talk to the property manager about who handles outdoor faucets and irrigation lines.
6. Install leak detection systems
Anthony Vance, owner of Harbor Tech Services, writes repair estimates after winter water losses for contractors and adjusters.
“The pattern I see most is a pipe that freezes over a weekend or holiday in a space nobody checks, then lets go when it thaws,” he says. “By Monday the water has been running for a day or more, and a small leak turns into drywall, flooring and cabinets coming out across several rooms.”
The Utah Division of Risk Management says installing remote moisture alarms cold help catch leaks after hours. Test the alerts before the first freeze and choose a backup contact who can get into the building if you’re unavailable.
“Before a freeze, I’d tell any business owner to know where the main shutoff is, keep the heat on and steady when the building is empty, and have someone walk the space after a cold snap,” Vance adds.
What to do if you discover water damage at your business
If you find water spreading across your shop or office, start by getting any employees and customers out of the affected area. From there, you can take the following steps to minimize the damage and document what happened:
- Check for electrical hazards. If water has reached outlets or equipment, stay out of the water. If you’d have to step into standing water to reach the breaker, call an electrician to shut off the power first.
- Stop the leak. If a pipe has burst and you can safely reach the water shutoff, close the valve and contact a plumber.
- Document the damages. As soon as it’s safe to do so, take photos and videos of the damage before cleanup begins. Photograph any affected rooms and get close-ups of damaged inventory or equipment.
- Arrange for cleanup. If water has spread into walls or flooring, contact a water damage restoration company. Save receipts for emergency plumbing, water removal and drying. If you have to temporarily close your business, keep a record of the dates and any appointments you had to cancel.
- Notify your insurer. File a water damage claim with your insurance company as soon as possible. Review your policy details to understand what part of your claim may be covered.